Reincarnations of my shack seem to be happening often. I have gone through about 3 different changes in the past year. I rung in the new year with my current setup, a KX3, Ten Tec 418 Amp, and the Wavenode power meter. I think this is the setup I will keep for awhile. KX3 is a nice rig however it takes some time to get acquainted with its operation. RX I/Q is nice as well for use with HDSDR. Hope I am done with changes for a while don’t think my brain can handle much more info!
73 DE W9TTW
On my way back from Florida, Ruth and I stopped at WSM 650 AM radio station. WSM uses a monster Blaw Knox antenna for transmission. When the 878-foot tower was built in 1932, it was the tallest antenna in North America. Its height was reduced to 808 feet (246 m) in 1939 when it was discovered that the taller tower was causing self-cancellation in the “fringe” areas of reception of the station (it is now known that 195 electrical degrees, about 810 feet, is the optimum height for a Class A station on that frequency). For a period during World War II it was designated to provide transmissions to submarines in the event that ship-to-shore communications were lost. It is now one of the oldest operating broadcast towers in the United States. It was also part of the CONELRAD US National Emergency Plan in the event of a nuclear war, or another national catastrophe. We just happened to be there on the 80th anniversary of the tower and the radio station. I was able to get up close to the antenna and related gear. The transmitter house was open but due to the long line to get in and our travel schedule we had to skip that part. I will post more pictures in the coming days. 73
These are all confirmed VIA HRDlog.net
I went to visit the Wizard today, I delivered some valves for his amplifier. Here he is knuckle deep in his Heathkit HA-14. Not shown in the picture but always there to help was his trusty assistant station engineer Tucker, who provides quality control at the WW9WG radio station. As always there was good conversation which ranged from how to properly blow up a 3 phase motor to the correct lenght of a windom antenna.
This has been another on going project an old welder that I couldn’t get parts for. I decided to turn it into a 90 amp variable power supply. Still have a few things to finish, mounting fuses, crowbar circuit. I just need to get the nerve to hook it up to a radio! Ha!
Added the AC and DC fuse circuits today. just need to add the crowbar circuits and a power switch and a good smoke test!